• The two-minute oil stain remover.
• It removes oil stains from concrete, asphalt and pavers, as well as garages, fuel pumps, drive-throughs and parking areas.
• Soaks into the surface breaks up the oil and lift the stains.
• Safe to use on concrete, asphalt, brick, paving tiles and cement.

Usage Guide: Concrete and Pavers: Add Oil Stain Remover to the stained area. Then apply half the amount of water to the stained area. Use a brush to agitate the stained area for 1 to 2 minutes. Make sure the solution does not dry. Add more product and water if necessary. Rinse the area completely with clean, high-pressure water. Repeat the application if necessary.

Asphalt: Add Oil Stain Remover to the stained area. Then apply half the amount of water to the stained area.  Use a brush to agitate the stained area for 30 seconds. Rinse the area completely with clean, high-pressure water. A long dwell time is NOT RECOMMENDED because of the oil content in asphalt.